World's 1st & Most Awaiting Solution
!! Sking U Disk Repair !!
Free For All VolcanoBox Users
How to format Android phones ?
- Go to Mtk tab
- Select Built-in-Boot-10(v7.1216)(65xx_Android)
- Untick Auto Detect pinouts
- Tick on USBMODE
- Click on Read info
- Click on run
- When it’s say “Analysis for usb port, please insert phone usb cable”
- PLUG Mobile with NORMAL usb cable to computer port ( With boot keys if needed and make sure drivers are installed )
- When it’s read info complete. You can see at the end FORMAT ADDRESS like this
- Format addr:0x428E8000 –format Length:0xE4200
- Now click on Format
- Click on yes
- Now format windows will open. You have to write your mobile’s format address into format windows start address and format length. for example you have format address of your mobile this Format addr:0x428E8000 –format Length:0xE4200 which you read from readinfo just write 428E8000 into start address(hex) box and write E4200 in format length(hex) box. Keep in mind you don’t have to write “0x” for example if you see in log by reading info Format addr:0x428E8000 –format Length:0xE4200 then you just write 428E8000 this do not write complete address with “0x” just leave “0x” and write rest all
- After writing Format address ( without “0x” ) Click on CUSTOMIZE
- When it’s say “Analysis for usb port, please insert phone usb cable”
- PLUG Mobile with NORMAL usb cable to computer port ( With boot keys if needed and make sure drivers are installed )
- Please wait till software says Flash Erasing Complete !!
- Now check your phone if after format phone ask you for code please turn it off and check is there mmc or sim inside or not. If sim or mmc inside please takeout and power on your phone it will not ask you for code again. If sim and mcc not inside please insert it and power on your phone it will not ask you for code again.
- Your phone is done. Make sure you Read Full flash file as back for Emergency. If some thing happen bad you can write back your readed flash file so your phone will come back to previous state !!
- Optimize MTK Android NAND Flash flashing(Boot V7.1216)
- Solve Mstar Erase bug
- Optimize Coolsand detection
- Now Volcano can pinfind new Coolsand Type cpu like Jmobile J228 etc.. )
How to repair U Disk Error on Sking mobiles ?
You have to download & Extract VolcanoBox V 1.7.5
Download & Extract Sking Flash files
S9300
S9220
S929
- Open Volcano Box 1.7.5
- Opon SPD Tab
- Select Built-in-Boot_13(6530)
- Click on Flash file button
- Click on Flash type
- Select All Files
- Brows Path of your Desire Flash file
- make sure your select correct flash file for your desire mobile
- Click on run
- Lets it's Flash.
- After flash your mobile is Repaired
No comments:
Post a Comment